Riff Box 2

RIFF Box 2 has been released!

After six successful years since the first RIFF Box hardware was released, we are introducing a new RIFF Box 2 hardware. Developers did their best to develop a reliable, marvelous, yet functional device.

RIFF Box 2 hardware is designed to accommodate a large variety of communication protocols.
RIFF Box 2 – Hardware Specification:

Dual-core Cortex-M4 MCU @ 204MHz
PC to Box USB (Device) Speed: Hi-Speed (480 Mbps)
Box to Device (Host) Speed: Full-Speed (48 Mbps)
SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz
UART Interface
RIFF™ Smart Probing Feature
Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.
4 fixed 3.3V GPIO Lines

RIFF Box 2 – Interface Specifications:

20-Pin Male Connector:
JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST
SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins)
30-Pin Male Connector:
SD/MMC Interface 1/4Bit @ 52MHz
Level-adjustable 23 GPIO Lines (1.65V to 3.6V)
USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec
USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec
RJ-45 Connector:
6.1 RIFF™ Smart Probing Feature
6.2 UART Port
6.3 4 Fixed 3.3V GPIO Lines

RIFF Box 2 – Supported SD/MMD Revisions:

Revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher
RIFF Box 2 – Supported JTAG Cores *:

ARM7
ARM920
ARM926
ARM946
ARM7EJS
ARM11
CORTEX-A5
CORTEX-A8
CORTEX-A9
CORTEX-A15
OMAP3430
OMAP3630
OMAP4430
TEGRA2 (CORTEX-A9)
TEGRA2 (ARM7)
QUALCOMM S3 (ARM7, ARM11, SCORPION)
QUALCOMM S4 (ARM7, ARM11, SCORPION)
NOVATHOR
PXA270
PXA312
MIPS32™ IR5Bit
MIPS32™ IR8Bit

RIFF Box 2 – Software:

RIFF JTAG Manager
RIFF Remote helper
RIFF Admin client / SN reader
RIFF Box USB drivers

New software is fully compatible with Windows 10, which provides effortless installation. Just connect RIFF Box to Windows 10-based PC and everything will be installed automatically. For older Windows versions, there are custom drivers provided with RIFF JTAG Manager installer.
RIFF Box 2 – Package Content:

Riff Box 2 – 1 pc.
Flat Cables – 3 pcs.

Due to the onrush of technology and efforts to meet every customer’s demands, the supplier retains the right to change some positions in the list of cables and accessories coming together with the product. Therefore, the package content presented above is rather tentative. More details on the matter can be obtained from our sales managers.

* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions. Complete list of supported models you can find on the official product page, or on the GSM forum.

Additional information