Soldering Wire Stannol Kristall 505 0,7mm 250gr
Alloy composition: SN60Pb40
Shape: Solder wire
Diameter: 0.7mm
Weight: 250 gr
Type: Kristall 505 810604
Melting temperature: 183 ° C
Raw materials: Sn60 / Pb40
Flux content: 3%
Flux Class: J-STD 004 REL1
Out of stock
PRODUCT NOT IN STOCK AT THE MOMENT
Send me an email when available
The soldering wire Kristall 505 is based on a low-halogen activated “No-Clean” flux.
It has been developed for high requirements for conventional soldering and for soldering SMDs in industrial production and for repair and resoldering.
The wire flux Kristall 505 is a low-halogen activated flux based on synthetic resins.
it combines high activity and good flow characteristics in an outstanding way with small amounts of solid and electrically safe residues.
Product Advantages:
Low halogenated activation
Transparent residues
Fast soldering; also on surfaces which are not optimal for soldering
High dispersion
Mild odour
Application
This soldering wire can be used for manual and machine soldering in the area of electrical engineering and electronics and shows its strengths where the wettability is not always optimal and the work has to be done quickly.
Stannol Kristall 505 contain different halide levels with maximised soldering power
Although users will normally be using products with a nominal flux content of 3%, the superior performance of the Kristall products may allow a lower flux content to be specified e.g. 2.2%.
This will further improve residue appearance by reducing the quantity.
All are available in alloys conforming to national and international standards, including lead-free alloys.
Some alloys and flux contents may be manufactured to special order.
Stannol Kristall solid fluxes are based on modified rosins and carefully selected activators.
In use, they exhibit a mild rosin odour and leave a small quantity of clear residue.
The used activated resin shows the following advantages:
• fast soldering (wide range of activities to suit all applications)
• good spread (on copper, brass and nickel)
• clear residues
• heat-stable (low spitting)
• mild odour
Alloy composition: SN60Pb40
Shape: Solder wire
Diameter: 0.7mm
Weight: 250 gr
Type: Kristall 505 810604
Melting temperature: 183 ° C
Raw materials: Sn60 / Pb40
Flux content: 3%
Flux Class: J-STD 004 REL1
Additional information
Weight | 0,28 kg |
---|
Reviews
There are no reviews yet.