Silver Conductive Glue Paint 0.3ML

Moblie Phone Screen Special Electric Conductor Silver Fluid K-1200 for iPhone 5

Note :
conductive silver paint needle tube is convenient to use when the seller packing needle needles, it is easy to suspect
knot , remember not to be used directly with a needle , in use , you can remove the needle , the conductive
silver paint out that compares with a needle or thin items , click on the small amount of conductive silver paint ,
draw a line at the break point can be connected, Note: after DLG , we have to wait until after the electrical
conductivity of conductive silver paint dry, an ordinary conductive silver paint dry naturally long time to reach
for several hours, the shop introduced quick-drying type conductive silver paint , a good solution to this problem.

Is mainly used to repair some inconvenience such as welding wire repair place some soft keyboard or the like
very fine wires , etc. ..

1 Features: 1 ) has excellent electromagnetic shielding effect.
2 ) for ABS, PC, ABS / PC plastic substrate adhesion is excellent.
3 ) 100% pure silver powder media , with excellent conductive properties.
4 ) excellent wear resistance.
5 ) excellent moisture resistance.
6 ) excellent drying property .
Good 7 ) film performance , no powder phenomenon , the film hard and durable .
8 ) precipitation layered product is not easy workability strong.

2 Technical Data
Solid powder 60-80 %
The proportion of 25 deg; C 1.46-1.48g/cm3
Resistance lt; 0.02 ohm / sq film thickness of 12 microns
Viscosity gt; 20000CPS
Shielding effectiveness gt; 80dB
Recommended dry film thickness of 12-16 microns
Recommended thinner water that day ethanol
Dilution ratio conductive paint : thinner = 1:0.7-0.8 ( weight ratio )
Humidity environmental test 85 deg; C / 85% relative humidity for 7 days resistor values unchanged
Dry conditions 60 deg; C 20 minutes ( you can use a hair dryer or heat gun curing faster )

Additional information