JBC JNASE-2A High-Precision Hot Air Station
JNASE-2A is the only Hot Air Station to rework, position and remove SMDs without affecting nearby components.
Perfect in areas with minimal separation.
JBC Exclusive System enables the regulation of temperatures and air at very low levels
Out of stock
PRODUCT NOT IN STOCK AT THE MOMENT
Send me an email when available
Precision soldering through hot air, especially for SMDs
JNASE-2A is the only Hot Air Station to rework, position and remove SMDs without affecting nearby components.
It is perfect for reworking SMDs in areas with minimal separation.
JBC Exclusive System enables the regulation of temperatures and air at very low levels in order to avoid the movement of adjoining components.
Makes it the perfect station for the easy and high-precision reworking of components as small as 01005, even under the magnifying glass.
The station includes T260 Pick & Place to position and remove components easily thanks to the built-in suction pump.
125-010 Heating Element is perfect to rework the smallest SMD components from 01005 up to SOIC-8.
It works with JNA High-Precision Hot Air Station which allows regulation of both flow and temperature at very low levels.
J125-010 has an outlet diamerter of 1 mm (0.039 in).
Precision soldering through hot air, especially for SMDs
JNA is the only Hot Air Station to rework, position and remove SMDs without affecting nearby components.
It is perfect for reworking SMDs in areas with minimal separation.
JBC Exclusive System enables the regulation of temperatures and air at very low levels in order to avoid the movement of adjoining components.
Makes it the perfect station for the easy and high-precision reworking of components as small as 01005, even under the magnifying glass.
The station includes T260 Pick & Place to position and remove components easily thanks to the built-in suction pump.
JBC offers a replacement heating element J125-010 with outlet diameters of 1mm
Specifications:
Nominal power: 70 Watts
Temperature selection: 150 – 450 C° 300 – 840 F°
Air flow regulation: 0.15 – 2.5 SLPM
Vacuum: 53%/397 mmHg/15.6 inHg
Communication connectors: USB-A/USB-B
Pedal/Stand: RJ12 for RS232
Product Composition
1x JNAE Control Unit
1x NH High-Precision Heater Hose Set
1x NHS Stand for NH High-Precision Heater Hose Set
1x NBC260 Bent Needles & cups for T260
1x P405 Pedal
1x T260 Pick & Place Handle
1x J125-010 Heating Element for JNA
Additional information
Weight | 5,5 kg |
---|
Reviews
There are no reviews yet.