ESOUND MEDICAL PROTECTION MASK N95/99 (FILTRATION RATE 99%) GB19083-2010
Meet standard GB19083-2010 (filtering capacity up to 99%)
4 Layers of mask:
1 layer: fungi-proofing Non-woven
2 layer: BFE 99 melt-blown fabric
3 layer: BFE 99 melt-blown fabric
4 layer: Close skin cotton
Sterile, Aseptic,
Ethylene Oxide Sterilization.
In stock
ESound Medical Device Co. Ltd, Medical Device Manufacturing
Medical protective mask
Lightweight disposable flat folded mask
Contour fit, Easy breathing or speaking
Material: non-woven and melt-blown cloth, nose clip and mask belt
Executive Standard: GB19083-2010
Multilayer filter protection, Filtration rate>99%
Certificate: CE, FDA, Noish
Single package Sealed in a sterilized environment
Sterile,
Single-use
Aseptic,
Ethylene Oxide Sterilization.
N95/99 Medical Standard
Multilayer filter protection, Filtration rate ≥99%
4 Layers of mask:
1 layer: fungi-proofing Non-woven
2 layer: BFE 99 melt-blown fabric
3 layer: BFE 99 melt-blown fabric
4 layer: Close skin cotton
Specifications and Models:
Duck-mouth, Arched, Folded
Structure and composition:
Nonwovens and polypropylene melt-spraying fabric production, nasal splint, mask belt (Conformity directive (s): 93/42/EEC)
Meet standard GB19083-2010 (filtering capacity up to 99%)
Relevant standard (s):
EN 14683:2019
EN ISO 10993-11:2018
Scope of application:
Applicable to the protection of medical personnel and related personnel against airborne respiratory infectious diseases
Original registration number: 20152640350
Approval date: 13/09/2108
Expiry date: 29/09/2023
Report Number: 202000843
Sample number: 20200431
Filtration efficiency:
When the gas flow rate is under 85L/min, the filtration efficiency of the mask for non-oily particles should meet the requirements in table 1 of the GB19083-2010 Standard
Inspection result: Min before temperature treatment: 99%
Min after temperature treatment: 99%
Air resistance:
When the gas flow rate is under 85L/min, the inhalation resistance of the mask should not exceed 343.2pa(35mmH2O)
Inspection result:
Max: 12mmH2O, Qualified
Synthetic blood penetration:
Spray 2ml of synthetic blood into the mask at 10.7kPa (80mmHg) pressure: No infiltration should occur inside the mask
Inspection result: Meet the requirements
Medical Device Directive 93/42/EEC
EC Declaration of Conformity (Annex VII of Directive 93/42/EEC
EN 14683:2019
EN ISO 10993-11:2018
EN ISO 13485:2016
CE/ISO13485/ISO9001
Additional information
Weight | 0,07 kg |
---|
Reviews
There are no reviews yet.