iCopy is a device to restore LCD true tone, vibrator & light sensors function.
By transferring the data from original LCD & vibrator chips;
iCopy can help technicians to fully restore a new replace LCD and vibrator’s function back to their original status.
Full Kit with 2 Boxes !!
JC C1 Box takes you into Intelligent repair
A new era of data analysis!
JC smart repair cable C1- so that repair has never been so easier
Equipped with maintenance BOX, support 6-8P, 6 common models in total
Type protection, overload protection and high temperature protection.
Voltage 0.01% + 3mV (i 3A)
Current 0.2% + 3mA (i 3A)
Speed and resolution of mediation
Voltage 0.01% + 3mv
Current 0.01% + 3mA
DIGITAL POWER SUPPLY 15V 3A
With a range of 0-5 Volts, or 0-15 Volts
High-tech, new power supply,
Especially suitable for mobile phone repair.
Full power 3A 5V.
Short ciruit protection (with automatic recovery).
Small practical convenient.
The charging USB intertace port, can charge your mobile phone and displays the charging current
Digital tube ammeter
One-button power-on function trigger button
Apple phone repair cable USB interface
Output DC voltage: 4.2V 5.02V
Output Current: 3A
iPOWER X is high precision DC to DC power supply,
Voltage and Current can be monitored in the same time.
Separate power on button for Apple devices
Easy control of the voltages and other functions using a computer.
High-Accuracy Numerical Control Power Supply
Voltage Output 2.00~9.00V accuracy 0.001V
Current output 0.01~3.00A accuracy 0.0001A
EU Plug Included
Digital and Pointers together
Real-time output current waveform display
Precision Linear pressure regulator design
Mobile phone repair special protection
Support QC2.0 QC3.0 PE FCP Quick Charge
QianLi ToolPlus battery connector for iPower pro Power cable 4pcs (+4 pcs heat shrink tubing)
It can be used to replace damaged battery terminal clip of iPower pro cable
For iPhone 6-6P-6S-6SP-7-7P-8-8P-X-XS
Battery Connector and Motherboard Power Terminal, guaina termo restringente
POWER LINE WITH ON/OFF SWITCH
IPHONE 6G-6P-6S-6SP-7G-7P-8G-8P-X-XS-XS MAX
Battery data simulation
Pointer ammeter interface
Dual connector design
Silicone flexible cable
K-100A iPhone Power Line with Original Battery Chip inside for iPhone 4 to iPhone X
Support: iPhone 4/4S/5/5S/6/6P/6S/6SP/7/7P/8/8P/X
Power current test cable w/ battery activation board for iPhone
Specially designed for iPhone 4-4S, 5-5S-5C-5SE, 6-6P, 6S-6sP, 7-7P, 8-8P, X
Easy to use and store
Detect the mobile phone failure through the current method
1. QC4.0 ,support fast charging
2. Real-time charging voltage current and discharge voltage current can be tested.
3. Real-time monitoring, data is real and effective, protect your equipment
4. Power-off memory function, data is not lost.
New Models !!
iPhone X, 8 and 8Plus !!
Say goodbye to Microscope !!
The phone motherboard layout is precise and compact
Most PIN have no epitaxial line for testing
And technicians can not detector and test the voltage value
The TristarTristar (or “Hydra” in newer models) is an IC on the logic board of iDevices that is used for authentication of USB devices.
It’s purpose is to check the authenticity of any attached cable or device via the Lightning Port
C U2 bring you the easiest way for iPhone power manager issues repair,
1. Real time data read and display
2 .Fast identify the status of U2 ((Tristar)) charger IC
3. Fast read of SN of logic board
SS-909 All In 1
iPhone, iPad, Huawei, Oppo, Samsung, Xiaomi…
Mobile battery Charger And Activation Circuit Board For Mobile Phone
Include a number of utility mode patents and exterior design patent
ADC: MCU internal ADC
Number of channels: 1 Analog channel + 1 internal channel
Analog bandwidth: 200KHz
The maximum sampling rate: 1MSa/s
Maximum storage depth: 8K
Horizontal scanning speed: 1uS / Div ~ 2S / Div (1-2-5 step)
Vertical Sensitivity: 20mv / Div ~ 10V / Div (1-2-5 step)
Input impedance: 1MΩ
Coupling: DC / AC